- Este debate tiene 150 respuestas, 27 mensajes y ha sido actualizado por última vez el hace 8 años, 11 meses por
.
-
Hola a todos He cambiedo la palanca izquierda deML6, a ver que os parece, hay que probar el invento a fondo pero parece que funciona bien.
La dificultad para poner este mando está en que el cable tiene en la parte del desviador un muelle interno que es el que hace que la palanca retroceda, en resumen el cable tiene que tener cabecilla arriba y cabecilla abajo, lo he solucionado empalmando el cable con dos prisioneros, el empalme está en la bolita esta plateada, también hay que hacer un freno de la camisa para tener recorrido en el cable, os paso unas fotos, si todo funciona bien ya lo desarrollaré bien el invento.
[img]http://img855.imageshack.us/img855/776/imagen005ys.jpg [/img] [img]http://img844.imageshack.us/img844/7228/imagen002jc.jpg [/img] [img]http://img825.imageshack.us/img825/7195/imagen003kd.jpg [/img] [img]http://img15.imageshack.us/img15/1427/imagen004zk.jpg [/img] Pedro46
:clapping:
-
Hola a todos, ya he terminado la modificación, el resultado de funcionamiento es perfecto, he conseguido por internet un tope de funda que he remachado, y un prisionero con dos tornillos. :bye: [img]http://img534.imageshack.us/img534/7853/imagexfud.jpg [/img] Pedro46
this is heaven!!! :clapping: I finally found someone that made this modification!!!:w00tmesalia: I found some
picture on flickrI’m also looking forward to do it but I was still missing some basic information I found only here.
I’m also considering to use the same shifter available for the right hand
[img]http://www.sturmey-archer.com/userfiles/shifters/small/SLS30-T-HSJ962.jpg [/img] Sturmey Archer SLS30
If you check
THIS LINK[img]http://farm9.staticflickr.com/8513/8500608509_e0128a1ca0.jpg [/img] The problem is that I don’t like very much the solution of the cable stopper on the lever and I am looking for something cleaner.
Unfortunately the SLS30 is only available for 3 speed so the stopper is necessary to limit the range of the gear to only 2 step.
Maybe «mixing» the solution of Pedro46 is possible to use the SLS30 also on the left…. but I like the idea of the lockout lever (it should be faster and easier to operate).
What do you think?
Sbrindola wrote:this is heaven!!!
:clapping: I finally found someone that made this modification!!!:w00tmesalia: I found some
picture on flickrI’m also looking forward to do it but I was still missing some basic information I found only here.
I’m also considering to use the same shifter available for the right hand
[img]http://www.sturmey-archer.com/userfiles/shifters/small/SLS30-T-HSJ962.jpg [/img] Sturmey Archer SLS30
If you check
THIS LINK[img]http://farm9.staticflickr.com/8513/8500608509_e0128a1ca0.jpg [/img] The problem is that I don’t like very much the solution of the cable stopper on the lever and I am looking for something cleaner.
Unfortunately the SLS30 is only available for 3 speed so the stopper is necessary to limit the range of the gear to only 2 step.
Maybe «mixing» the solution of Pedro46 is possible to use the SLS30 also on the left…. but I like the idea of the lockout lever (it should be faster and easier to operate).
What do you think?
Hola Sbrindola
A mi esto de poner un prisionero en la palanca me parece muy poco correcto, como bien dices el bloqueador de horquilla va perfecto, es muy rápido y preciso.
Pedro46
What a speed and what a pleasure … the man itself! :clapping: I’ve been speaking with the shop that made this modification: they had to reverse the cable, using the head on the opposite side of the lever to get a good shifting.
When they used the cable in the standard position with the blocker on the other end the shifting was not smooth.
As far as I know that did not change anything else.
Of course a blocker must be used in any case to limit the range to only 2 gears.
I like the idea to have the same lever also on the left but your solution is better from technical point of view.
Sbrindola wrote:What a speed and what a pleasure … the man itself!
:clapping: I’ve been speaking with the shop that made this modification: they had to reverse the cable, using the head on the opposite side of the lever to get a good shifting.
When they used the cable in the standard position with the blocker on the other end the shifting was not smooth.
As far as I know that did not change anything else.
Of course a blocker must be used in any case to limit the range to only 2 gears.
I like the idea to have the same lever also on the left but your solution is better from technical point of view.
Es evidente que hay que invertir el cable , necesitas la cabeza del cable en la parte de abajo, pero yo lo he solucionado con un tope de funda remachado al cuadro de la bici. Con esto consigo una cabeza en la palanca y otra cabeza en el cambio abajo. Son dos cables unidos por el prisionero rojo.
Saludos
Pedro46
proximamente :w00tmesalia: :w00tmesalia: [img]http://i.imgur.com/AQgteEw.jpg [/img] [img]http://i.imgur.com/Y0qzigy.jpg [/img] sto aspettando i pezzi…. appena procedo con la modifica farò vedere il risultato
Sbrindola wrote:proximamente
:w00tmesalia: :w00tmesalia: [img]http://i.imgur.com/AQgteEw.jpg [/img] [img]http://i.imgur.com/Y0qzigy.jpg [/img] sto aspettando i pezzi…. appena procedo con la modifica farò vedere il risultato
Ostras muy guapo!
:w00tmesalia: Pon mas info! algun link o mas fotos, no seas timido
:blum3:
- Debes estar registrado para responder a este debate.